|
ELECTRICAL & ELECTRONICS |
|
Bottom |
|
DC REGULATED POWER SUPPLIES
General Specifications
 |
Input Voltage
: 230V ±10% AC 50Hz |
|
Load
Regulation : ±0.2% |
|
Line
regulation : ±0.05% |
|
Ripple : Less
than 3mV R.M.S. |
|
Protections :
Against short circuit & over load |
Output Voltage Current
|
0-15V/1.0 Amps
|
|
0-15V/2.0 Amps
|
|
0-30V/1.0 Amps
|
|
0-30V/2.0 Amps
|
|
0-30V/3.0 Amps
|
|
0-30V/5.0 Amps
|
|
0-60V/1.0 Amps
|
|
0-60V/2.0 Amps
|
|
0-60V/5.0 Amps
|
|
|
|
|
|
FIXED OUTPUT DC
REGULATED POWER SUPPLIES
|
VE-131 5 Volts (Settable from 4.5 to 5.5 VDC)
0-1 Amp |
|
VE-132 5 Volts (Settable from 4.5 to 5.5 VDC)
0-2 Amp |
|
VE-133 12 Volts (Settable from 11.5 to 15.5
VDC) 0-1 Amp |
|
VE-134 12 Volts (Settable from 11.5 to 15.5
VDC) 0-2 Amp |
|
VE-135 24 Volts (Settable from 22 to 26 VDC)
0-1 Amp |
|
VE-136 24 Volts (Settable from 22 to 26 VDC)
0-2 Amp |
|
VE-137 Electronic standard cell output
voltage 1.018 VDC |
|
|
|
|
|
GENERAL PURPOSE
CONTINUOUSLY VARIABLE DC REGULATED POWER SUPPLIES
VE-145 DC Regulated
Power Supply for Electroforsis Apparatus (Solid State) Output voltage :
0-300 VDC/100mA (With reversing switch to change the polarity at the output
terminals ) L.T. voltage :6.0VAC/2 Amps. Complete with two 3.5 digit LED
digital panel meters.
VE-161 DC Regulated
Power Supply for Diode/ Triode Valve Characteristics HT Voltage /
Current : 0-300 VDC/ 30mA Bias Voltage/ Current : 0-25 VDC/ 10 mA L.T.
voltage/ current : 6.0 VAC/ 1 Amps with three round meters. |
|
|
|
|
AC/DC POWER SUPPLIES
All AC/DC Power Supplies
are complied in a suitably sized steel cabinet, input & output are protected
with fast blow fuse, AC & DC outputs are available on sockets/ terminals.
Also provided with off-on switch & mains indicator. VE-170 High tension
AC/DC Power Supply H.T. Out Put Voltage : 0-500V AC/DC, Output Current :
500mA L.T. Voltage : 2.5V, 4.4V, 6.3V & 12.6V AC/2 Amps Bias Voltage : 0-100
V DC/ 10mA With 2 deluxe meters to measure H.T. voltage & bias voltage
VE-171 Low Tension AC/DC Power Supply 0-25V AC/10A, 0-20V DC/10A With 1
rectangular deluxe meter to measure AC/DC voltages, selectable using toggle
switch. |
|
|
|
|
AC/DC POWER SUPPLIES IN
THE STEPS OF 2 VOLTS
Standard Model Output
Voltage Current
|
VE-201 2-12 V/ 1 Amp
|
|
VE-202 2-12 V/ 2 Amps
|
|
VE-203 2-12 V/ 3 Amps
|
|
VE-204 2-12 V/ 4 Amps
|
|
VE-205 2-12 V/ 5 Amps
|
|
VE-215 2-24 V/ 5 Amps |
|
|
|
Top |
|
<< Back << |
>> NEXT >> |
