| |
|
ELECTRICAL & ELECTRONICS |
|
Bottom |
|
AUTOMATIC VOLTAGE
STABILIZER
All Automatic Voltage
Stabilizers are compiled in a suitably sized strong steel cabinet with one
moving iron AC/DC voltmeter to display input/ output voltages. Output
voltage (200 to 245 V AC) is available on 5/15A socket in upto 2 KVA models
& at bakelite connectors in all other higher capacity models. Suitable gauge
mains cable is provided for input connections.
Capacity Input Voltage 140
to 290V AC and Input Voltage 100 to 290V AC
0.5 KVA 1.0 KVA 2.0 KVA 3.0
KVA 4.0 KVA 5.0 KVA 8.0 KVA 10 KVA 15 KVA |
|
|
|
|
VARIABLE AUTO
TRANSFORMER (VARIAC) WITH ENCLOSURE
Input Voltage : 220/240 V
AC Output Voltage : 0-270A AC Available in Single and Three Phase 2 Amps, 4
Amps , 8 Amps, 10 Amps, 15 Amps, 20 Amps, 28 Amps |
|
|
|
|
BATTERY CHARGERS &
ELIMINATORS
All Battery Chargers &
Eliminators have rectified DC output Voltage, protected with fast blow fuse
and are 220V AC operated. However, output voltage depends on input voltage
and load current. Output voltage is available on 4mm sockets/ terminals & is
selectable using band switch. One moving ironAC/DC meter is provided in
battery chargers to measure charging current. BATTERY CHARGERS
MODEL Output
Voltage/ Current
 |
VE-301 2-12 V DC/ 1 Amps
|
|
VE-302 2-12 V DC/ 2 Amps
|
|
VE-303 2-12 V DC/ 3 Amps
|
|
VE-304 2-12 V DC/ 4 Amps
|
|
VE-305 2-12 V DC/ 5 Amps
|
|
VE-316 6/12V/3 Amps with fine current
control |
|
VE-317 6/12V/4 Amps with fine current
control |
|
VE-318 6/12 V/5 Amps with fine current
control |
AUTOMATIC BATTERY
CHARGERS
General Specifications are
same, but automatic battery chargers has been designed to charge the battery
at a constant current & there is no need to select output voltage
|
|
|
|
|
BATTERY ELIMINATORS
Model Output Voltage/Current
|
VE-401 2-6 V
DC/1 Amp |
|
VE-402 2-6 V
DC/2 Amp |
|
VE-403 2-6 V
DC/3 Amp |
|
VE-411 2-12 V
DC/1 Amp |
|
VE-412 2-12 V
DC/2 Amp |
|
VE-413 2-12 V
DC/3 Amp |
|
VE-414 2-12 V
DC/4 Amp |
|
VE-415 2-12 V
DC/5 Amp |
DC REGULATED BATTERY
ELIMINATORS Technical Specifications are same as in case of DC Regulated
Power Supplies
MODEL
|
VE-420 DC regulated Battery Eliminator
2-12V/ 0.5A in the steps of 2 Volts |
|
VE-421 DC regulated Battery Eliminator
2-12V/ 1.0A in the steps of 2 Volts |
|
VE-422 DC regulated Battery Eliminator
2-12V/ 2.0A in the steps of 2 Volts |
|
|
|
|
|
TRANSFORMERS STEP DOWN
TRANSFORMERS
All Step Down Transformers
have AC output voltage, protected with fast blow fuse and are 220V AC
operated. However, output voltage depends on input voltage & load current.
Output voltage is available on 4mm sockets/ terminals & is selectable using
band switch.
Model Output
Voltage Current
|
VE-481 2-12V AC/1Amp
|
|
VE-482 2-12V AC/2Amp
|
|
VE-482 2-12V AC/3Amp
|
|
VE-484 2-12V AC/4Amp
|
|
VE-485 2-12V AC/5Amp |
|
|
|
Top |
|
<< Back << |
>> NEXT >> |
|
