HUMIDITY CABINET :
Double walled construction, inner made out of richly anodized aluminium or stainless steel sheet and outer of thick mild steel duly finished in stoving enamel paint. Gap is filled with glass wool for temp., insulation. A circulation fan has been provided to maintain uniform temp. & humidity through out the chamber. Nichrome heating elements are provided to heat the chamber effectively.

Temperature range from ambient to 60° C is controlled by a thermostat. L-shaped thermometer is provided to indicate temp. in the chamber. Humidity is created by generating steam by heating water in a stainless steel reservoir by an immersion heater and subsequently condensation in circulating air. The humidity is controlled by a humidistat from atmospheric humidity to 95% ±3% RH.

The double walled door has been provided with a double wall clear glass window for observation in the chamber without opening the door and disturbing conditions.

A control panel has been provided on left of the body and is provided with all control switches, indicators etc. Equipment to work on 220 V AC 50 Hz single phase. Supplied complete with cord & plug but without hygrometer.

Models : - Chamber size:
a) 455 x 455 x 455 mms. (Ht.)
b) 455 x 455 x 710 mms (Ht.)
c) 605 x 605 x 605 mms (Ht.)
d) 605 x 604 x 910 mms (Ht.)

OPTIONALS : (Extra cost)
i) Hygrometer (Humidity indicator).
ii) Digital Temp. Controller – cum – indicator.
iii) Digital Temp. indicator.
iv) Automatic voltage stabilizer 3 KVA (must)