LABORATORY PLASTIC WARE

REAGENT BOTTLES (NARROW MOUTH)
These narrow mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polypropylene cap has a built in seal ring to make these bottles leak proof.
Capacity : 60ml, 125ml, 250ml, 500ml, 1000ml.

REAGENT BOTTLES (WIDE MOUTH)
These narrow mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polypropylene cap has a built in seal ring to make these bottles leak proof.
Capacity : 60ml, 125ml, 250ml, 500ml, 1000ml.

WASH BOTTLES
Polylab Wash Bottles are made of low density Polyethylene which gives these bottles a translucent and unbreakable character. Solution can be poured easily by squeezing the bottle lightly. The cap is fitted with a flezible polyethylene delivery tube which can be aimed wherever required.
Material : Low Density Polyethylene

WASH BOTTLE (New Type)
These bottles are also made of Low Density Polyethylene and are therefore translucent and unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one piece Wash Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.
Capacity : 250ml, 500ml.

DROPPING BOTTLES
Blown in low density polyethylene, Polylab Dropping bottles dispense small uniform drops of liquids when pressed lightly.
Capacity : 60ml., 120ml.

htmIRATOR BOTTLE
Polylab htmirator Bottles are made of polypropylene and are therefore much lighter than glass. These are autoclavable, durable and dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water and other laboratory solutions. Threads should be totally disengaged before autoclaving.
Capacity : 5 Ltrs, 10 Ltrs

BEAKERS
Polylab Beakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.