| |
|
LABORATORY PLASTIC WARE |
|
Bottom |
|
CONICAL FLASK
Made of Polypropylene, these cone shaped flasks
are rigid, translucent and autoclavable. The screw cap keeps the contents of
the flask contamination free and makes the flask leakproof. Threads should
be disengaged before autoclaving.
Capacity : 100ml, 250ml, 500ml |
|
| |
|
|
SYPHON
These self priming Syphons can be used for
pouring liquids from large containers to small ones without actually lifting
them. Insert the open end of the tube in the liquid, close the stop cock and
pump the bulb. As soon as the liquid enters the bulb, flow is automatically
regulated. Stop pumping further. Liquids cam now be despensed by opening the
stopcock.
Material : Low Density Polyethylene |
|
| |
|
|
MEASURING CYLINDERS
Polylab Measuring Cylinder, moulded in
Polypropylene, are single piece cylinders. These autoclavable cylinders have
raised prominent graduations for easy reading and have excellent contact
clarity. The broad base provides good stability.
Material : Polypropylene |
 
|
| |
|
|
BURETTE
This burette has a transparent acrylic body and
a leakproof stopcock fitted with a self lubricating PTFE plug. Each burette
is individually calibrated to give maximum accuracy. Acrylic body is
unaffected by dilute mineral acids and bases except Hydrofloric Acid and
Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used upto 5%
wt/wt of acids or 30% bases.
Capacity : 25ml, 50ml. |
|
| |
|
|
TEST TUBES BASKETS
Polylab Test Tube baskets are made of
Polypropylene. These autoclavable, unbreakable and non-corrosive baskets are
ideal for rinsing and draining glassware. These are also useful for storage
of test tubes or culture tubes during sterlization or incubation.
Size : 140 x 120 x 110mm, 160 x 160 x 160mm |
|
| |
|
|
VOLUMETRIC FLASK
Polylab Volumetric Flasks, blown in
Polypropylene, are strong, unbreakable and have good contact clarity. These
autoclavable flasks are provided with screw caps to prevent leakage.
Capacity : 25ml, 50ml, 100ml, 250ml, 500ml, 1000ml |
|
| |
|
|
KIPP's APPARATUS
Polylab Kipp's Apparatus made of Polyethylene
has three main portions. The top portion is fitted with a thistle funnel and
a bulb structure through which dilute acid can be poured which reacts with a
metal sulphide in the base of apparatus. H S gas then evolved collects in
the middle dome from where it can be released through a leakproof stopcock
fitted with a self lubricating PTFE plug. The base is provided with a
residual outlet fitted with a cap for easy cleaning.
High Density Polyethylene
Capacity : 250ml, 500ml, 1000ml. |
|
|
TOP |
|
[<Back<] |
[>Next >] |
|
